110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient

110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient

110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient
110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient. Electric Tankless Water Heaters revolutionize hot water heaters with technology that provides you with unlimited hot water when you need it, without the wait or worry of ever running out. By automatically activating once water flow is sensed and shuts off when it stops, you'll lower your water consumption and eliminating costly water waste. The Electric Tankless Instant Water Heater is the eco-friendly, efficient and convenient solution you have been looking for, delivering an endless supply of hot water instantly at the point of use only when you need it. It is suitable for both residential and commercial applications, even in your RV, so you can enjoy a continuous flow of hot water whenever you want.

Best of all, unlike a gas water heater, the compact design requires no venting, giving you the flexibility to install anywhere inside your home or garage. The compact footprint of this device can be installed against the wall either under the sink out of sight or near the point of use, where its elegant design blends into your home environment among other appliances.

Unit will require a 30 Amp dedicated circuit breaker to operate properly. Remember inlet temps vary by location and seasonality.

Selecting the right water heater depends on your incoming water temperature, flow rate, and desired output temperature. Ideal for a single sink application in areas with at least 57°F ground water temperature. Requires a direct connection to a 30 Amp single-phase breaker, not a plug-in unit. Unit requires a 30 Amp dedicated single-phase breaker, maximum flow rate of 0.5 GPM is recommended. Includes 0.5 GPM aerator for sink faucet and pressure relief device.

Required wire size: 10 AWG standard 1/2 in. Instant and endless hot water on demand without the wait or worry of ever running out. Save up to 50% on your water heating costs. Conserves energy - activates only with water flow at 0.5 GPM. Eliminates the wait for hot water and water wastage.

Ideal for commercial or residential, single sink applications. Install either under the sink out of sight or near the point of use, leaving free storage space in your basement or attic. No scale and mineral buildup due to the fact that water temperature is not reaching 140 degrees F / 60 degrees C and there is no storage of hot water. Required wire size: 10 AWG. Working pressure: 8 BAR (115 psi).

Maximum tested working pressure: 16 BAR (230 psi). Minimum operating temperature: 36 degrees F. Nominal water volume: 0.11 Gal.

Compact, eco-friendly design, made up of recycled material, installs neatly underneath sink. The item "110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient" is in sale since Friday, March 23, 2018.

This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Water Heaters\Tankless Water Heaters". The seller is "eliadner1261" and is located in Bronx, New York. This item can be shipped to United States.


110-Volt 0.5 GPM Point of Use Tankless Electric Instant Water Heater Efficient


Home  Links  Contact Us  Privacy Policy  Terms of service